SITE DIARY
There is a general concept in the
piping industry that the support welding of piping is a simple one and any
welder can do it. Also it is a common thought that there is no need to take
care of welding of the pipe support, because its just a support.
The above
picture shows the water coming out of the trunion support due to hole in the
elbow which was the result of improper welding practices of welding the pipe
support.
This
picture was taken at the time of hydrotest.
Please
ensure welding of pipe support with due care and these issues can be avoided.
Here the
hydrotest is offered for inspection after one coat of painting!!!!!!!
Disclaimer:
The ideas presented are of own ideas or the ideas that are felt acceptable to
the blogger. Photos are taken from different websites. If this violates any
copyright rules this will be removed. Please inform me if any of the photos or
contents violates copyright rules. (through 13hareesh13@gmail.com). This blog
is meant for educational purpose only. If it is used for any other means
without the written consent from the author, the author will not be
responsible. Author does not guarantee the accuracy of data used in this blog.All the information, data, photo/image, calculations
presented in this blog should be used at the sole risk of the user. The blogger
is not liable or responsible in any way for any damage, losses or costs arising
from use of the blog for any purpose whatsoever or whosoever it may be. The
blog is to be used at your sole risk and responsibility.
cheak
ReplyDelete