ASTM AND DIN - IQI (Penetrameter) Details

on
IQI's are available in different standards. The most common ones are ASTM and the DIN standard IQI's.

The ASTM wire type IQI's are available in 4 set's. 
1. SET A
2. SET B
3. SET C
4. SET D

The DIN wire type IQI's are also available in 4 set's. 
1. 1-ISO-7
2. 6-ISO-12
3. 10-ISO-16
4. 13-ISO-19

The main difference is that in each set of ASTM wire type IQI'S , 6 wires are available where in DIN type each 7 wires are available.


ASTM WIRE TYPE IQI DETAILS


DIN WIRE TYPE IQI DETAILS


Related Posts

Comments

  1. UnknownAugust 3, 2018 at 12:06 PM

    4 mm thk wich pentrameter set to be used asper
    DIN

    ReplyDelete
    Replies
    1. HAREESH K VNovember 29, 2019 at 10:11 PM

      What is your sensitivity requirement? Which is the code /sttandard that you are following for radiography?

      Delete
  2. HAREESH K VAugust 4, 2018 at 9:32 AM

    As per Table T-276 of ASME BPVC Sec V; for 4mm, WireIdentity no:5(Source Side;0.20mm wire dia of ASTM set A ) and Wire identity no:4(Film Side; 0.16mm Wire dia of ASTm Set A) to be visible.

    The corresponding DIN wire IQI to be used. In this case Source side and Film side IQI are to be of 10 FE DIN if all the other essential parameters like Material, IQI refernce standard are same as discussed here.

    ReplyDelete
    Replies
    1. UnknownDecember 12, 2018 at 5:28 PM

      For 4mm thk. Wich penetrameters and wire according to iso

      Delete
    2. UnknownSeptember 3, 2019 at 1:25 PM

      What is the full form of DIN

      Delete
    3. HAREESH K VSeptember 3, 2019 at 10:20 PM

      DIN, Deutsches Institut für Normung e.V. (German Institute for Standardization) develops norms and standards.

      Delete
  3. HAREESH K VDecember 15, 2018 at 5:52 PM

    As per Table T-276 of ASME BPVC Sec V;

    For 4mm according to ISO wire type IQI

    Wire Number 13; (Source Side;0.20mm wire dia, minimum 4 wires to be visible of 10ISO16) to be visible.

    Wire Number 14 (Film Side; 0.16mm Wire dia, minimum 5 wires to be visible of 10ISO16 ) to be visible.

    ReplyDelete
  4. GREATE ARTICLENovember 2, 2019 at 3:46 PM

    I am New join for Ndt services
    as computer operator
    so pls help radiography examination report

    ReplyDelete
    Replies
    1. HAREESH K VNovember 3, 2019 at 2:15 PM

      What you want to know about radiography examination report?
      Please explain. Is it for making a report or something else.

      Delete
  5. UnknownDecember 9, 2020 at 10:56 PM

    What is meaning of DIN 62FE
    WE KNOW DIN IS CODE NAME AND FE MEANS IRON BUT I WANNA KNOW ABOUT 62 MEANING

    ReplyDelete
  6. JibrinFebruary 3, 2022 at 6:07 PM

    Is the DIN wire IQI the same as the EN 462-1 wire IQI?

    ReplyDelete
  7. AnonymousJune 3, 2022 at 11:39 AM

    6 FE din & 6 ISO 12 can used in one film..?

    ReplyDelete

Post a Comment